AV wiper seal

AV wiper seal

The AV wiper protects the hydraulic system against, dust, dirt, moisture and other environmental influences.
The moulded dirt shield on the wiper prevents the migration of moisture underneath the wiper in the groove. The common occurrence of corrosion in the groove can thus be avoided. In applications with a vertically positioned piston rod head the dirt shield to protect the seal groove is particularly effective. Water running down the piston rod is diverted and does not enter the wiper groove. Due to the press fit in the housing and the pressure relief drill hole the risk of the wiper being pushed out of the cylinder housing is minimised.

FEATURES

Robust seal profile for harshest operating conditions.
Extreme wear resistance.
Excellent media resistance in case of suitable compound selection.
Suitable compounds available for special requirements of the chemical process industry.
Suitable compounds available for special requirements of the food processing industry.
The dirt shield prevents the intrusion of dirt and moisture in vertical cylinder applications.
Installation in closed and undercut housings.
Additional sizes of machined products available on short notice

Range of application

The AV wiper can be used in all hydraulic cylinders and is particularly well-suited for mobile applications.

Operating temperature-35 °C to +100 °C
Sliding speed≤ 2 m/s

Installation

The profile AV double lip wiper ring can easily be snapped into grooves of simple design. Any contact of the wiper lip with piston rod eyes or other connecting parts should be avoided.
However, we recommend the wiper lip to be out-side the housing, so that the wipedoff dirt falls off.
A ring-shaped area for improved abutting of the dirt shield should be provided at the front side of the cylinder.

dDHLaD1
28367.754134
30387.754136
36447.754142
40487.754146
45537.754151
5668105.51.565
6375105.51.572
8092105.51.589
100115169.53110
125140169.53135
140155169.53150
160175169.53170
180195169.53190
200215169.53210